Husqvarna P/N 503895414
Husqvarna P/N 503895416
Husqvarna P/N 503895418
Concrete Grinding Applications:
Grit Size - Changing the size of the diamond grit to a smaller particle / grit size will affect the performance of the diamond tool in the following ways:
Single Segment - Working with a single segment will increase the pressure on each segment. This will lead to more aggressive and increased productivity; however, the life of the tool will be shorter
Double Segment - Working with a double segment will decrease the pressure on each segment, reducing the wear rate on the diamond segments. This will lead to a smoother scratch pattern, and will also reduce the load on the machine.
Half Set VS Full Set
Half Set - Diamonds placed at three alternating positions on the diamond holder disc (diamonds at four alternating positions).
When diamonds are set up as a half set, they tend to follow the surface of the floor similar to a tripod for a camera, which can be placed on an uneven surface and yet still find stable footing.
The half set diamond configuration should only be used when a flat floor is not required.
Full Set - Diamonds placed at each of the six positions on the diamond holder disc (diamonds at all eight positions).
When the diamondsare set up as a full set, they tend not to follow the surface of the floor. If the floor has undulations, the machine will grind the high areas and miss the low spots.
The full set diamond configuration should be used when a flat floor is desired.